Search found 24 matches

by MGZRreplica
Sat Aug 22, 2020 8:49 pm
Forum: Events and Meetings
Topic: Metro and Mini Show/BMC and Leyland Show 6th Sept 2020
Replies: 51
Views: 2520

Re: Metro and Mini Show/BMC and Leyland Show 6th Sept 2020

Put me in the hat please.

11. MGZRreplica in a coupe or 216SLi
by MGZRreplica
Tue Jun 09, 2020 10:36 am
Forum: Technical and Diagnosis
Topic: Did pre L-reg R8 are ready IR alarm
Replies: 13
Views: 780

Re: Did pre L-reg R8 are ready IR alarm

Thanks for your advice.
I received the part today.
The multipoint connector in the Cars
courtesy’s Lamp fitting didn’t fit
the
New ‘Ir’ courtesy/receiver lamp fitting
connector!

It was worth a try.
It would been an easy upgrade.
Now sending it back to Rimmer Bros.
by MGZRreplica
Sat Jun 06, 2020 1:46 pm
Forum: Technical and Diagnosis
Topic: Did pre L-reg R8 are ready IR alarm
Replies: 13
Views: 780

Re: Did pre L-reg R8 are ready IR alarm

Rimmer couldn’t help.
So I took the plunge!
by MGZRreplica
Fri Jun 05, 2020 10:02 pm
Forum: Technical and Diagnosis
Topic: Did pre L-reg R8 are ready IR alarm
Replies: 13
Views: 780

Did pre L-reg R8 are ready IR alarm

Just been looking on Facebook.

Found out you can buy an alarm IR kit
For early R8 before the fitted the Alarm/immobiliser as standard.

I have a G-Reg could that have the IR
capability?
As anybody got any information?

Thanks for your time.
by MGZRreplica
Thu May 14, 2020 4:40 pm
Forum: Technical and Diagnosis
Topic: Swooping Alarm control unit on a coupe
Replies: 3
Views: 410

Re: Swooping Alarm control unit on a coupe

The boot lid courtesy light comes
on when the boot is open.
So is the alarm separate to the
immobiliser?
by MGZRreplica
Thu May 14, 2020 12:43 pm
Forum: Technical and Diagnosis
Topic: Swooping Alarm control unit on a coupe
Replies: 3
Views: 410

Swooping Alarm control unit on a coupe

Has anybody swooped the alarm module. It’s on a 96 coupe with a fob, It’s without internal sensor. Recently I could open the boot and the alarm would go off. Now it doesn’t. It still immobilises. Any ideas? Where is it? And if you swop it don’t you have to Sync the fobs again? Thanks for your time.
by MGZRreplica
Tue Apr 14, 2020 8:17 pm
Forum: Technical and Diagnosis
Topic: Part numbers for 1992 1.6 Honda r8
Replies: 8
Views: 862

Re: Part numbers for 1992 1.6 Honda r8

Thanks
Fitted NgK spark plugs,
Kerr nelson distributer cap,
Bosch leads and
Fram fuel filter.

Mechanic said I need a new cam belt kit.
Has anybody got the engine code?
Or cam belt kit part numbers?

Thanks again.
by MGZRreplica
Wed Apr 08, 2020 5:55 pm
Forum: Technical and Diagnosis
Topic: Broken seat height adjuster
Replies: 7
Views: 476

Re: Broken seat height adjuster

I’ve got a basic seat base which is
non-height adjustable or no seat belt
tensioner.
by MGZRreplica
Wed Apr 08, 2020 4:32 pm
Forum: Technical and Diagnosis
Topic: Broken seat height adjuster
Replies: 7
Views: 476

Re: Broken seat height adjuster

I’ve took the seat out the bar
at the front has split both sides
by MGZRreplica
Mon Apr 06, 2020 9:16 pm
Forum: Technical and Diagnosis
Topic: Broken seat height adjuster
Replies: 7
Views: 476

Re: Broken seat height adjuster

Thanks.
Looking forward to your reply.
I suppose you should be able
to change it.
by MGZRreplica
Mon Apr 06, 2020 11:02 am
Forum: Technical and Diagnosis
Topic: Broken seat height adjuster
Replies: 7
Views: 476

Broken seat height adjuster

Has anybody fixed seat adjuster.
The seat rocks backwards and forward.
Anybody got any advice?
Or a detailed drawing?
Thanks
by MGZRreplica
Sat Mar 28, 2020 6:59 pm
Forum: Technical and Diagnosis
Topic: Rover r8 200/400 rear upright catch
Replies: 5
Views: 330

Re: Rover r8 200/400 rear upright catch

Thanks for the reply’s.
Wd-40 latches.
Loosened 4 hinge bolts, there’s not much
play and re-tightened bolts.
Wd-40 latches again tomorrow.
See how it goes.
Thanks again.
by MGZRreplica
Sat Mar 28, 2020 2:34 pm
Forum: Technical and Diagnosis
Topic: Rover r8 200/400 rear upright catch
Replies: 5
Views: 330

Rover r8 200/400 rear upright catch

Just wondering I’ve just fitted some new used seats to 1992 -216sli. The up right seat Is now higher and the catch doesn’t lock on to the upright seat tight. There is a bigger gap by the parcel shelf. The seats are lifted higher so the seat belt buckles don’t click in to the holders. So I’ve just me...
by MGZRreplica
Thu Mar 19, 2020 6:05 pm
Forum: Ebay
Topic: Rover cabriolet £6.495! 23k
Replies: 2
Views: 480

Rover cabriolet £6.495! 23k

On eBay there is a red 1.6 auto 23k
An import . £6495
by MGZRreplica
Thu Mar 12, 2020 3:44 pm
Forum: Technical and Diagnosis
Topic: Pressure release valve on Honda steering rack
Replies: 4
Views: 403

Pressure release valve on Honda steering rack

My steering is really light on my 1.6 Honda
Fitted to a j-plate r8. I spoke to John at the coupe AGM he suggested it might be the spring
Has gone inside.
The mechanic wants to know where the pressure release valve is on the steering rack?
Thanks for your time.