Search found 4348 matches

by 1234dist
Sun Nov 17, 2019 2:19 pm
Forum: Technical and Diagnosis
Topic: Chrome/plastic trim
Replies: 9
Views: 302

Re: Chrome/plastic trim

The easiest way is to take the door cards off and unclip the plastic trims that poke through the door skin.

Once off you can use silicon lube or wd on the back of the trim to help it slide out.
Then just feed the excess back through the plastic trim and pull HARD.
by 1234dist
Sun Nov 17, 2019 8:41 am
Forum: Introductions
Topic: New Member
Replies: 12
Views: 546

Re: New Member

If those were the last not details you found, chances are not good I’m afraid
by 1234dist
Sun Nov 17, 2019 7:13 am
Forum: The Gallery
Topic: 200 BRM
Replies: 22
Views: 1963

Re: 200 BRM

Unless you are in double digits, you haven’t got enough :clapping
by 1234dist
Mon Nov 11, 2019 6:54 pm
Forum: Rover 200 and 400 Chat
Topic: Club Member Discount with XPart
Replies: 7
Views: 1608

Re: Club Member Discount with XPart

We are their target audience after all...*laughs*
by 1234dist
Mon Nov 11, 2019 6:00 pm
Forum: The Lounge
Topic: Dash cams
Replies: 9
Views: 1405

Re: Dash cams

I have a merc with the auto dim rear mirror so not looking for the mirror replacement type.

But thanks for the link.
by 1234dist
Sun Nov 10, 2019 8:41 pm
Forum: Ebay
Topic: Rare MG6 Engine Cover on ebay - Fits the later K-Series !
Replies: 2
Views: 658

Re: Rare MG6 Engine Cover on ebay - Fits the later K-Series !

No good with out the addition of 25x
by 1234dist
Sun Nov 10, 2019 8:37 pm
Forum: The Lounge
Topic: Dash cams
Replies: 9
Views: 1405

Re: Dash cams

#bulk discount
I need 4/5 of them
by 1234dist
Sun Nov 10, 2019 4:14 pm
Forum: Upgrades & Modifications
Topic: Any easy grommet between interior & engine?
Replies: 14
Views: 1489

Re: Any easy grommet between interior & engine?

Right hand side at the bulkhead there is a large rubber grommet there you can pass a flat head screw drive through with your starter cables attached.

Any reason you don’t want it on the key as you still need to position 2 regardless?
by 1234dist
Sat Nov 09, 2019 12:09 pm
Forum: The Lounge
Topic: Dash cams
Replies: 9
Views: 1405

Dash cams

Getting a bit bored of the wife’s nightmare journeys to and from work so looking for a good dash cam.

From what I’ve been reading some only record for like 20 mins. Which is obviously no good.

I’m looking for front and rear be it single or two camera system.

What you got?
by 1234dist
Wed Nov 06, 2019 9:15 pm
Forum: Technical and Diagnosis
Topic: Clutch Master Cylinder
Replies: 3
Views: 359

Re: Clutch Master Cylinder

You will need to pump it a number of times.

There is a video on YouTube.
by 1234dist
Wed Nov 06, 2019 2:37 pm
Forum: Cabriolet
Topic: Front Sub frame bent
Replies: 19
Views: 2020

Re: Front Sub frame bent

anchor wrote:
Wed Nov 06, 2019 12:55 pm


https://www.ebay.co.uk/itm/400912169337

That's a rear subframe, below is what is commonly known as the front subframe for your car

Image

£60 new inc vat
by 1234dist
Tue Nov 05, 2019 9:32 am
Forum: Technical and Diagnosis
Topic: HELP! No power at all in the missus 25!
Replies: 10
Views: 441

Re: HELP! No power at all in the missus 25!

Check all the earths.

Are you able to get a jump start?
Could be the cell in the battery has died.
by 1234dist
Tue Nov 05, 2019 9:31 am
Forum: Technical and Diagnosis
Topic: HELP! No power at all in the missus 25!
Replies: 10
Views: 441

Re: HELP! No power at all in the missus 25!

Check all the earths
by 1234dist
Tue Nov 05, 2019 7:48 am
Forum: Technical and Diagnosis
Topic: Head Gasket/Oil Ladder Upgrade.
Replies: 6
Views: 514

Re: Head Gasket/Oil Ladder Upgrade.

I use the kit from Dmgrs myself and it’s really good quality.
Especially the stretch bolts which don’t have that horrible binding snapping noise while you are tightening them knowing you still have 180 degrees to go.