Search found 4371 matches

by 1234dist
Sun Nov 10, 2019 8:37 pm
Forum: The Lounge
Topic: Dash cams
Replies: 14
Views: 1917

Re: Dash cams

#bulk discount
I need 4/5 of them
by 1234dist
Sun Nov 10, 2019 4:14 pm
Forum: Upgrades & Modifications
Topic: Any easy grommet between interior & engine?
Replies: 14
Views: 1743

Re: Any easy grommet between interior & engine?

Right hand side at the bulkhead there is a large rubber grommet there you can pass a flat head screw drive through with your starter cables attached.

Any reason you don’t want it on the key as you still need to position 2 regardless?
by 1234dist
Sat Nov 09, 2019 12:09 pm
Forum: The Lounge
Topic: Dash cams
Replies: 14
Views: 1917

Dash cams

Getting a bit bored of the wife’s nightmare journeys to and from work so looking for a good dash cam.

From what I’ve been reading some only record for like 20 mins. Which is obviously no good.

I’m looking for front and rear be it single or two camera system.

What you got?
by 1234dist
Wed Nov 06, 2019 9:15 pm
Forum: Technical and Diagnosis
Topic: Clutch Master Cylinder
Replies: 3
Views: 377

Re: Clutch Master Cylinder

You will need to pump it a number of times.

There is a video on YouTube.
by 1234dist
Wed Nov 06, 2019 2:37 pm
Forum: Cabriolet
Topic: Front Sub frame bent
Replies: 19
Views: 2552

Re: Front Sub frame bent

anchor wrote:
Wed Nov 06, 2019 12:55 pm


https://www.ebay.co.uk/itm/400912169337

That's a rear subframe, below is what is commonly known as the front subframe for your car

Image

£60 new inc vat
by 1234dist
Tue Nov 05, 2019 9:32 am
Forum: Technical and Diagnosis
Topic: HELP! No power at all in the missus 25!
Replies: 10
Views: 508

Re: HELP! No power at all in the missus 25!

Check all the earths.

Are you able to get a jump start?
Could be the cell in the battery has died.
by 1234dist
Tue Nov 05, 2019 9:31 am
Forum: Technical and Diagnosis
Topic: HELP! No power at all in the missus 25!
Replies: 10
Views: 508

Re: HELP! No power at all in the missus 25!

Check all the earths
by 1234dist
Tue Nov 05, 2019 7:48 am
Forum: Technical and Diagnosis
Topic: Head Gasket/Oil Ladder Upgrade.
Replies: 6
Views: 559

Re: Head Gasket/Oil Ladder Upgrade.

I use the kit from Dmgrs myself and it’s really good quality.
Especially the stretch bolts which don’t have that horrible binding snapping noise while you are tightening them knowing you still have 180 degrees to go.
by 1234dist
Sat Nov 02, 2019 6:40 pm
Forum: Ebay
Topic: FS: Rover 216 Cab Pickup conversion
Replies: 5
Views: 491

Re: FS: Rover 216 Cab Pickup conversion

He’s got a red one with a turbo engine ;)
by 1234dist
Sat Nov 02, 2019 7:09 am
Forum: Ebay
Topic: FS: Rover 216 Cab Pickup conversion
Replies: 5
Views: 491

Re: FS: Rover 216 Cab Pickup conversion

Been around for a while, but £1200 for a cut n shut is very steep in my eyes.
by 1234dist
Fri Nov 01, 2019 8:42 pm
Forum: Project Cars
Topic: Track R8 214 Sprint
Replies: 169
Views: 15991

Re: Track R8 214 Sprint

Its aa stock wheel mr scrutineer just google it,

Like i did

Image
by 1234dist
Fri Nov 01, 2019 2:31 pm
Forum: Technical and Diagnosis
Topic: Jump Starting
Replies: 18
Views: 896

Re: Jump Starting

Rovers jump easy, only autos can’t be bumpstarted.
by 1234dist
Tue Oct 29, 2019 7:32 am
Forum: Project Cars
Topic: Track R8 214 Sprint
Replies: 169
Views: 15991

Re: Track R8 214 Sprint

That being said brings a few good points, looks better and i can set the car lower but the on the negative side means i cant run the big brake kit so im down to ZR160 282mm discs and calipers :scared Im also going to have to use the 216 GTI wheels (which are heavier than the 17's) because the Turbo...
by 1234dist
Tue Oct 29, 2019 7:29 am
Forum: Project Cars
Topic: Track R8 214 Sprint
Replies: 169
Views: 15991

Re: Track R8 214 Sprint

JOHNDQ wrote:
Sun Mar 24, 2019 8:34 pm
Yeah she a beast have to go easy and watch gauges one of the juniors managed to split a brake drum by trying to press the bearing out the wrong way :headbanging
I bet it came out though...*laughs*