R65 to PG1 Speedo cable

Done anything to upgrade or personalise your 200 or 400? Wanting some advice on upgrades? Then talk about it in here.

Moderator: Forum Staff

Post Reply
Message
Author
JOHNDQ
Enthusiast
Posts: 278
Joined: Sat Mar 25, 2017 12:38 am
Car Ownership: Other Rover

R65 to PG1 Speedo cable

#1 Post by JOHNDQ » Sat Mar 10, 2018 11:49 am

Hi all just after a bit of info if possible. Just on a mad rush to get ready for POL and trying to get the parts ordered to get car moving. One of these is to get the Speedo work, the car originally had a R65 box but I'm going to be running the PG1 from a ZR with the 20 tooth pinion with threaded top. Just wondering if anyone knows will I just need the lower half of the Speedo cable (no.7 on Rimmer's page) or a whole new cable.

Thanks for any help

User avatar
1234dist
Club Member
Posts: 5309
Joined: Fri Aug 26, 2011 9:08 pm
Car Ownership: Rover 400 Mk1 (R8) Saloon
Location: Chapel of Dist, Manchester
Contact:

Re: R65 to PG1 Speedo cable

#2 Post by 1234dist » Sat Mar 10, 2018 11:59 am

just the section that attaches to the box, same issue i had when doing the cabby.
220 Coupe turbo K785OAT (issues :glare )
Rover Sport 220GTI m-series K56AEP
218 VVC Cabriolet R170FEU
220 GTI M-series J777RAL
416 K-series Tourer R416NEB
75 2.0 CDT P80CJM
620 SLI P267LOM HONDA
420 GSI Turbo L191CVP

JOHNDQ
Enthusiast
Posts: 278
Joined: Sat Mar 25, 2017 12:38 am
Car Ownership: Other Rover

Re: R65 to PG1 Speedo cable

#3 Post by JOHNDQ » Sat Mar 10, 2018 12:06 pm

Thanks mate much appreciated

Post Reply