REFERENCE SHOCK ABSORBERS

Done anything to upgrade or personalise your 200 or 400? Wanting some advice on upgrades? Then talk about it in here.

Moderator: Forum Staff

Post Reply
Message
Author
ecampo
Club Member
Posts: 5
Joined: Sat Nov 30, 2019 7:23 pm

REFERENCE SHOCK ABSORBERS

#1 Post by ecampo » Fri Jan 17, 2020 10:21 pm

Good night.

As I told you about my presentation and, wishing to improve aspects of my Rover 414, I wanted to lower the suspension of my Rover 414, you have advised me in the forum to put behind the dampers of a ZS (I have already put them) and in front of some of ZR 160 or TD.

My question is: These with the Ref: RND 106010 that I have located in a scrap yard are any of those models? {I have been told that it is from a ZR 160).
I've searched Rimmerbros for this reference and I don't get any shock absorber.

Greetings

P.S. sorry i poor english

Image

User avatar
Johnny 216GSi
Club Treasurer
Posts: 2654
Joined: Wed Nov 19, 2014 10:17 pm
Location: Birmingham - the home of Rover!

Re: REFERENCE SHOCK ABSORBERS

#2 Post by Johnny 216GSi » Fri Jan 17, 2020 11:02 pm

ecampo wrote:
Fri Jan 17, 2020 10:21 pm
My question is: These with the Ref: RND 106010 that I have located in a scrap yard are any of those models? {I have been told that it is from a ZR 160).
I have searched for the part number RND106010 just with Google. I'm getting a lot of references that say they are for the 200/25 2-litre diesel model.
Rover 216GSi K reg. Flame Red over Tempest Grey

Image Image

ecampo
Club Member
Posts: 5
Joined: Sat Nov 30, 2019 7:23 pm

Re: REFERENCE SHOCK ABSORBERS

#3 Post by ecampo » Sun Jan 19, 2020 5:51 pm

Thank you very much for the information

RoverTD
Club Member
Posts: 49
Joined: Sat Feb 24, 2018 6:54 pm
Location: Herefordshire

Re: REFERENCE SHOCK ABSORBERS

#4 Post by RoverTD » Mon Jan 20, 2020 12:01 am

I suspect RND106010 is a production number for a damper & spring assembly and is not sold like that as a spare part . Rimmers list only includes springs or dampers , but not the complete assembly

User avatar
GTiJohn
Club Chairman
Posts: 4845
Joined: Mon Aug 16, 2010 8:01 pm
Location: Midlands
Contact:

Re: REFERENCE SHOCK ABSORBERS

#5 Post by GTiJohn » Mon Jan 20, 2020 7:39 am

RoverTD wrote:
Mon Jan 20, 2020 12:01 am
I suspect RND106010 is a production number for a damper & spring assembly and is not sold like that as a spare part . Rimmers list only includes springs or dampers , but not the complete assembly
Pretty sure you're correct :clapping
I like Twin Cams.... and Single Cams

Post Reply