MG ZS 180 24mm Rear Anti Roll Bar

Done anything to upgrade or personalise your 200 or 400? Wanting some advice on upgrades? Then talk about it in here.

Moderator: Forum Staff

Post Reply
Message
Author
The Origina lNom
Posts: 100
Joined: Sun Aug 12, 2018 5:07 pm

MG ZS 180 24mm Rear Anti Roll Bar

#1 Post by The Origina lNom » Fri Jul 31, 2020 4:34 pm

I just emailed Andy at Vehicle Handling Solutions enquiring if they could produce a 24mm ARB for Rover 400/ ZS/ Honda MB6 and he sounded quite positive and very helpful
. It makes a change to get a bit of positivity back from an enquiry regarding producing Rover MG parts
He said he could organise a one off if necessary and I'm waiting on a price. i will keep you advised.
If 24mm is good enough for an Integra Type R then its good enough for mine and might stop the rear becoming loose under duress.
If anyone else is interested I suggest emailing him as it would help him to have an idea of numbers needed.
https://www.vehiclehandlingsolutions.com/contact-us/
Feel free to share on other MG Rover forums.
R

JOHNDQ
Posts: 580
Joined: Sat Mar 25, 2017 12:38 am

Re: MG ZS 180 24mm Rear Anti Roll Bar

#2 Post by JOHNDQ » Sat Aug 01, 2020 10:10 pm

Why not just use someone like Hardraces kit for the Civics that's what I'm going to do

The Origina lNom
Posts: 100
Joined: Sun Aug 12, 2018 5:07 pm

Re: MG ZS 180 24mm Rear Anti Roll Bar

#3 Post by The Origina lNom » Sun Aug 02, 2020 4:27 pm

The DC2 24mm rear anti roll bar does not fit as standard because i tried one and the end mounts dont fit.
Do Hardrace do some sort of conversion kit that effectively extends the side mounts by four inches ?

JOHNDQ
Posts: 580
Joined: Sat Mar 25, 2017 12:38 am

Re: MG ZS 180 24mm Rear Anti Roll Bar

#4 Post by JOHNDQ » Sun Aug 02, 2020 5:30 pm

Yes it's a whole kit which ones with a panel/brace to mount the roll bar to for all the various Hondas. I haven't got mine yet as I've been putting all the PCI bearings etc on rear

User avatar
GTiJohn
Club Chairman
Posts: 4938
Joined: Mon Aug 16, 2010 8:01 pm
Location: Midlands
Contact:

Re: MG ZS 180 24mm Rear Anti Roll Bar

#5 Post by GTiJohn » Mon Aug 03, 2020 4:40 pm

Andy and Alan at VHS are really nice guys and they know there stuff :clapping
I like Twin Cams.... and Single Cams

The Origina lNom
Posts: 100
Joined: Sun Aug 12, 2018 5:07 pm

Re: MG ZS 180 24mm Rear Anti Roll Bar

#6 Post by The Origina lNom » Wed Aug 05, 2020 5:31 pm

JohnDQ, I've looked at the Hardrace site and a few other places but I have not seen a kit to fit Honda MB6 which is the same as Rover HHR, I have found a chassis brace and 25.4 mm arb for Honda EK9 and other Civics for £339 but I think 25.4 maybe good for the track but too rigid for anything near comfort on the roads.

Post Reply